Petzl EXO EASHOOK Bedienungsanleitung PDF herunterladen (Seite 6)

EXO CE SACOCHE D305100A (040808)

Installation on the harness

The EXO must always be connected to the harness attachment

point.

An extended attachment point allows the OK TRIACT BAR to be

permanently connected to the harness with the bag attached at the

side.

Pay attention to the orientation of the OK TRIACT BAR in the

attachment point because this determines the correct position of the

descender during evacuation (see drawing). Make sure the gate is

correctly closed and locked.

Good

position

Deﬁning and making an anchor

is a topic that is too complex to

be fully described in this notice.

Only a few examples are shown.

You must learn how to make an

anchor during your training.

Anchor the rope to a solid ﬁxed

anchor using the rope end

connector (10 kN).

WARNING DANGER OF

DEATH: your rope must not be

in contact with an edge that is

sharp or abrasive or having a

high temperature.

WARNING, the rope end

connector must not be loaded

over an edge (for example on a

beam), because its strength will

be reduced.

Installation on the anchor

1 2 3 4 5 6 7 8 9 10 11 ... 27 28

Keine Kommentare

Petzl EXO EASHOOK Bedienungsanleitung Seite 6